McQuay MDS Service Manual

MCQUAY Service Guide Book Handset Operating Guide
18
Differences between Netware 3 & Netware 3C:
Netware 3 Netware 3C
Compatibility
Non-inverter / X-inverter
Series
Y-inverter Series
Casing Color Dark Silver White
Retrieve Last State Error No Yes
Pump Down No Yes
Applicable model All except A(5)WM-J/JR
For MCK-E, only applicable
with nomenclature ACOBB
All except M5WMY-J/JR
NIM/G-WAY Yes
For MCK-E, only applicable
with nomenclature ACOBB
No
Operating Guide
1. “ON/OFF” Switch
• Caution: In the case when the ON/OFF
key is pressed immediately after the
operation is stopped, the unit will not
restart until 3 minutes later to protect the
compressor.
2. Selecting Operating Mode
• Press the MODE key to select the type of
operating mode. Consecutive press of the
key switches the
• operation over “COOL”, “HEAT”, “AUTO”,
“DRY” and “FAN”
3. Fan Speed Selection
• Press the FAN key until the desired fan
speed is achieved.
4. Sleep Mode Setting
• Press the SLEEP key to activate sleep
mode. Available under COOL, HEAT &
AUTO mode.
• When it is activated in COOL mode, the
set temperature will be increased 0.5°C
after 30mins, 1°C after 1 hour and 2°C
after 2 hours.
Jumper
20 - 30
Application
SET Set temp range : 20°C ~ 30°C
OFF Set temp range : 16°C ~ 30°C
1. Time display
2. Key lock display
3. Error indication
4. Fan speed display
5. Operation mode display
6. Sleep mode display
7. Air swing display
8. Temperature set display

McQuay MDS Specifications

General

Brand	McQuay
Model	MDS
Category	Air Conditioner
Language	English