56
The hour display flashes.
Use arrow button
or to set the hour. Press the button to set the minute
display.
The minute display flashes.
Use arrow button
or to set the minutes.
Confirm your selection by pressing the
button.
The time is now set.
7. Vacuum mode
To achieve the best cleaning performance, ensure that all loose objects (curtains,
clothing, paper, loose cables and extension cables) are removed from the floor.
NOTICE!
Risk of damage to property!
Loose cabling can become caught around your robot
vacuum cleaner during vacuuming and be pulled by
the appliance. This can result in appliances being pulled
off a table and consequently damaged.
Lay cables out of the reach of the appliance.
This robot vacuum cleaner is not suitable for use on carpets.
Every time a button is pressed you will hear an acoustic signal to confirm.
Before switching it on, remove the mains adapter plug from the appliance.
Ensure that the dust container is clean and that the filter has been correctly
inserted.
Place the robot vacuum cleaner in an open space in the room.
Move the On/Off switch to the I position and the appliance is ready for use. The
six operating lights on the robot vacuum cleaner light up.
Press the button on the appliance or the button on the remote control
to start the cleaning process.
Both middle LED operating lights on the robot vacuum cleaner light up
permanently.
The robot vacuum cleaner performs standard cleaning, depending on the obstacles.
First, it systematically covers a section of the area. The robot vacuum cleaner defines
a work area by first moving forward before then turning in another direction. Once
the work area has been outlined, the robot vacuum cleaner cleans this area as
shown in the illustration below.
To Next Page
Loading...
Need help?
General
