118
Controls in detail
Instrument cluster
Instrument cluster
A full view illustration of the instrument
cluster can be found in the "At a glance"
section of this manual (
컄 page 22).
The instrument cluster is activated when
you
ì•« open a door
ì•« turn on the ignition
앫 press the reset knob (컄 page 22)
ì•« switch on the exterior lamps
You can change the instrument cluster set-
tings in the instrument cluster submenu of
the control system (
컄 page 134).
Instrument cluster illumination
Use the reset knob (
컄 page 22) to adjust
the illumination brightness for the instru-
ment cluster.
To brighten illumination
왘 Turn the reset knob in the instrument
cluster clockwise (
컄 page 22).
The instrument cluster illumination will
brighten.
To dim illumination
왘 Turn the reset knob in the instrument
cluster counterclockwise (
컄 page 22).
The instrument cluster illumination will
dim.
i
The instrument cluster illumination is
dimmed or brightened automatically to
suit ambient light conditions.
The instrument cluster illumination will
also be adjusted automatically when
you switch on the vehicle’s exterior
lamps.
To Next Page
Loading...
Need help?
General
