Mercedes-Benz 2003 E 320 User Manual

334
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
1 Bulb socket for turn signal lamp
2 High beam bulb
3 Bulb socket for parking and standing
lamp
High beam bulb (Halogen headlamps
only)
왘 Switch off the lights.
왘 Open the hood (컄 page 261).
왘 Press the clamp and remove headlamp
cover.
왘 Pull electrical connector off.
왘 Turn the locking mechanism counter-
clockwise and take out the high beam
bulb 2.
왘 Insert the new high beam bulb so that
the base is in the recess of the holder.
왘 Turn the locking mechanism clockwise.
왘 Plug the connector onto the high beam
bulb.
왘 Align headlamp cover and click into
place.
High beam bulb (Bi-Xenon* headlamps
only)
왘 Switch off the lights.
왘 Open the hood (컄 page 261).
왘 Press the clamp and remove headlamp
cover.
왘 Pull electrical connector off.
왘 Turn the locking mechanism counter-
clockwise and take out the high beam
bulb 2.
왘 Insert the new high beam bulb so that
the base is in the recess of the holder.
왘 Turn the locking mechanism clockwise.
왘 Plug the connector onto the high beam
bulb.
왘 Align headlamp cover and click into
place.
Warning! G
Because of high voltage in Bi-Xenon lamps,
it is dangerous to replace the bulb or repair
the lamp and its components. We recom-
mend that you have such work done by a
qualified technician.

Mercedes-Benz 2003 E 320 Specifications

General

Brand	Mercedes-Benz
Model	2003 E 320
Category	Automobile
Language	English