278
Operation
Maintenance
Setting the date for special works
You can enter appointments for exhaust
gas analysis and general inspection over
FSS PLUS.
왘 Switch ignition on.
The standard display of the control sys-
tem appears (
컄 page 121).
왘 Press button k or j on the mul-
tifunction steering wheel until the
FSS PLUS indicator appears in the mul-
tifunction display.
왘 Press the reset knob (컄 page 22) for
about five seconds.
The
SERVICE MENU
appears in the multi-
function display.
왘 Select the
SPECIAL WORK
menu with the
+ or - button.
왘 Press the ÿ button.
The service indicator now displays the
SPECIAL WORK
menu.
왘 Select the
EXH.-GAS ANALYSIS
or
GEN-
ERAL INSPECTION
menu with the +
or - button.
왘 Press the ÿ button.
The service indicator now displays the
NEXT DUE DATE
menu.
왘 Select the
MONTH a
nd
YEAR
with the
+ or - button.
왘 Press button k or j on the mul-
tifunction steering wheel to set the
month and year.
왘 Select
DATE CONFIRMED
with the +
or - button.
왘 Press the ÿ button.
The new date is set.
왘 Press button è on the multifunction
steering wheel until the standard dis-
play appears in the multifunction dis-
play.
FSS PLUS now recalculates the values.
You cannot call up the service display or
the service menu during this time.
To Next Page
Loading...
Need help?
General
