101
Controls in detail
Memory function
You can store a parking position for the
passenger exterior rear view mirror for
each key and each KEYLESS-GO* card us-
ing the memory switch.
1 Passenger side exterior rear view mir-
ror
2 Adjustment button
왘 Stop the vehicle.
왘 Switch ignition on (if not already on).
왘 Press button 1 in center console.
The passenger side exterior rear view
mirror is selected.
왘 Adjust the exterior rear view mirror
with button 2 so that you see the rear
wheel and the road curb.
왘 Press memory button M on the door.
왘 Within three seconds press adjustment
button 2 in the center console.
The parking position is stored if the
mirror does not move.
i
If the mirror does move, repeat the
above steps. After the setting is stored
you can move the mirror again.
To Next Page
Loading...
Need help?
General
