133
Controls in detail
Control system
Resetting fuel consumption statistics
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see the reading that you want
to reset in the left display.
왘 Press and hold the reset knob in the in-
strument cluster (
컄 page 21) until the
value is reset to
0
.
Call up range (distance to empty)
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see this message in the left
display:
Range
.
In the right display you will see the cal-
culated range based on the current fuel
tank level.
TEL menu*
Warning! G
A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we rec-
ommend that you pull over to a safe location
and stop before placing or taking a tele-
phone call. If you choose to use the tele-
phone while driving, please use the
hands-free device and only use the tele-
phone when weather, road, and traffic con-
ditions permit.
Some jurisdictions prohibit the driver from
using a cellular telephone while driving a ve-
hicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of approximately
44 feet (approximately 13.5 m) every sec-
ond.
To Next Page
Loading...
Need help?
General
