132
Controls in detail
Control system
Fuel consumption statistics after start
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see this message in the left
display:
After start.
1 Distance driven since start
2 Average speed since start
3 Time elapsed since start
4 Average fuel consumption since start
Fuel consumption since last reset
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see this message in the left
display:
From reset.
1 Distance driven since last reset
2 Average speed since last reset
3 Time elapsed since last reset
4 Average fuel consumption since last re-
set
i
All statistics stored since the last en-
gine start will be reset approximately
four hours after the key in the starter
switch is turned to position 0 or re-
moved from the starter switch.
Resetting will not occur if you turn the
key back to position 1 or 2 within this
time period.
To Next Page
Loading...
Need help?
General
