204
Controls in detail
Automatic climate control
Adjusting air volume
Use button U (
컄 page 199) for auto-
matic mode or air volume controls
or Q (
컄 page 199) to adjust air volume
manually.
Seven blower speeds are available.
왘 Press button to decrease
or Q (
컄 page 199) to increase air
volume to the desired level.
The indicator lamp on the button U
goes out.
The automatic air distribution remains
switched on.
Front defroster
You can use this setting to defrost the
windshield, for example if it is iced up.
You can also defog the windshield and the
side windows.
Activating
왘 Press button P or 0
(
컄 page 199).
The indicator lamp on the button
comes on.
The air conditioning switches
automatically to the following functions:
앫 cooling on to dehumidify
앫 maximum blowing and heating
power
앫 air flows onto the windshield and
the front side windows
앫 the air recirculation mode is
switched off
Deactivating
왘 Press button P or 0
(
컄 page 199) again.
The indicator lamp on the button goes
out.
The previous settings are once again in
effect.
Windshield fogged on the outside
왘 Switch the windshield wipers on
(
컄 page 55).
If the automatic mode of the automatic cli-
mate control is switched off:
왘 Turn air distribution control 1 or 8
to a or Y (
컄 page 199).
i
Keep this setting selected only until the
windshield or the side windows are clear again.
i
If you have switched on the defrost function
using the P or 0 button, you cannot
make any other settings.
i
The cooling remains switched on.
i
Keep this setting selected only until the
windshield is clear again.
To Next Page
Need help?
General
