424
Practical hints
Resetting activated head restraints
Resetting activated head restraints
If the active head restraints have been trig-
gered in a rear-end collision, the active
head restraints must be reset. Otherwise,
the active head restraints cannot offer any
additional protection in the event of anoth-
er rear-end collision.
You can tell that the head restraints have
been triggered when they have been
moved forward and cannot be adjusted.
1 Head restraint cushion
2 Head restraint cover
3 Reset tool
4 Hole
왘 Take the reset tool 3 out of the
Mercedes-Benz vehicle literature
pouch.
왘 Guide reset tool 3 into the hole 4 be-
tween the rear head restraint cover 2
and the head restraint cushion 1.
왘 Press the reset tool 3 downward until
you hear the active head restraint re-
lease mechanism audibly engage.
왘 Pull out reset tool 3.
왘 Firmly press the head restraint
cushion 1 back toward the rear head
restraint cover 2 until it engages.
왘 Repeat this procedure on the active
head restraint for the second seat.
왘 After resetting the active head re-
straints store the reset tool 3 in the
Mercedes-Benz vehicle literature
pouch.
For information on active head restraints,
see “Active head restraints” (
컄 page 80).
For information on head restraint adjust-
ment, see “Seats” (
컄 page 39).
i
For your convenience, we recommend that
you have this work carried out by an authorized
Mercedes-Benz Center.
You will find the reset tool for manually operating
the active head restraints in the Mercedes-Benz
vehicle literature pouch.
Warning! G
For safety reasons, have the active head re-
straints checked by an authorized
Mercedes-Benz Center after a rear-end
collision.
Warning! G
When pushing back the head restraint cush-
ion, take care that your fingers do not be-
come caught between the head restraint
cushion and the cover. Failing to do so may
lead to injury.
!
Be careful not to damage upholstery.
To Next Page
Loading...
Need help?
General
