407
Practical hints
Where will I find...?
Setting up the collapsible wheel chock
The collapsible wheel chock serves to
additionally secure the vehicle, e.g. while
changing the wheel.
1 Tilt the plate upward
2 Fold the lower plate outward
3 Insert the plate
왘 Tilt both plates upward 1.
왘 Fold the lower plate outward 2.
왘 Guide the tabs of the lower plate all the
way into the openings of the base
plate 3.
For information on where to place wheel
chocks when changing a wheel, see “Lift-
ing the vehicle” (
컄 page 441).
Minispare wheel
The Minispare wheel is located in the
storage compartment underneath the
trunk floor.
Removing the Minispare wheel
왘 Lift up trunk floor cover and engage
trunk floor handle in upper edge of
trunk.
왘 Loosen the retaining screw in the mid-
dle of storage well casing by turning it
counterclockwise (
컄 page 405).
왘 Remove the storage well casing
(
컄 page 405). 컄컄
To Next Page
Loading...
Need help?
General
