116
Control systems
COMAND audio CD/audio DVD/MP3
Notes about handling CDs/DVDs
앫 Only hold discs by the edge.
앫 Handle discs carefully to prevent play-
back problems.
앫 Avoid getting scratches, fingerprints
and dust on discs.
앫 Clean discs from time to time with a
commercially-available cleaning cloth.
Do not wipe them with a circular mo-
tion, but only in straight lines from the
center outwards.
앫 Only use a pen designed for such a pur-
pose to label discs.
앫 Place discs back in their boxes after
use.
앫 Protect discs from heat and direct sun-
light.
Inserting CDs and DVDs Loading the CD/DVD changer
The CD/DVD changer can hold up to a to-
tal of 6 audio CDs or DVDs.
1 Disc slot
2 Load button (all magazine trays)
3 Magazine tray buttons 1 – 6
Warning! G
Only insert a CD or DVD when the vehicle is
stationary. There is a risk of accident by be-
ing distracted from road and traffic condi-
tions if you load a CD/DVD while the vehicle
is in motion.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
i
If the CD/DVD has a printed side, this must
face upwards when the CD/DVD is inserted. If
neither side is printed, the side to be played
should face downwards.
i
Each magazine tray button 3 indicates the
status of the corresponding magazine tray by
means of an LED.
앫 LED off = magazine tray is empty
앫 LED constantly lit = magazine tray is loaded
앫 LED flashes = CD/DVD changer requesting
disc to be loaded
To Next Page
Loading...
Need help?
General
