266
Control systems
COMAND vehicle menu
Setting interior lighting delayed
switch-off
Use this function to set whether and how
long you would like the interior lighting to
remain lit during darkness after you have
removed the SmartKey from the starter
switch.
You can select:
앫 “0 sec.”, the delayed switch-off feature
is deactivated
앫 “15 sec.”, “30 sec.”, “45 sec.”, or
“60 sec.”, the delayed switch-off fea-
ture is activated
왘 Select “Vehicle”.
The main area is active.
왘 Selecting “Interior Lighting Delayed
Switch-off” menu: Slide omp or
rotate ymz.
왘 Confirming selection: Press n.
A selection list appears.
The current setting is indicated by a
dot R.
왘 Selecting length of time: Slide qmr
or rotate ymz.
왘 Confirming selection: Press n.
or
왘 Select “Vehicle” “Vehicle” “Interi-
or Lighting Delayed Switch-off”.
A selection list appears.
The current setting is indicated by a
dot R.
왘 Selecting length of time: Slide qmr
or rotate ymz.
왘 Confirming selection: Press n.
i
The components and operating principles of
COMAND can be found on (
컄 page 83).
To Next Page
Loading...
Need help?
General
