246
Control systems
COMAND navigation system (real-time traffic)
List for active route guidance
When route guidance is active, the list dis-
plays only the streets which are part of the
route and for which messages are present.
1 Show all messages (including those
which do not affect the route)
2 Affected streets (only shown when
messages which affect the route are
present)
왘 Display all messages: Select “Display
All Messages”.
All streets are shown for which mes-
sages are present, as well as for those
which are not on the route.
왘 Read a message: Select a street.
You can find an example message on
(
컄 page 246).
왘 Close the list: Slide omp once or re-
peatedly.
Example message
1 Selection display (“Messages On
Route” or “All messages”)
2 Symbol for message event (e.g. traffic
jam)
3 Street affected by the message
4 Message 1 of 1 for the affected street
5 Message text
The symbols for the possible message
events are shown in the following.
1 Traffic jam symbol
2 Stop and go traffic symbol
3 Warning message symbol
4 Blocked section symbol
왘 Scroll through the contents or to the
next message: Turn ymz or slide
qmr.
To Next Page
Loading...
Need help?
General
