387
Controls in detail
Memory function
Storing exterior rear view mirror park-
ing position
For easier parking, you can adjust the pas-
senger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
For information on activating the parking
position, see “Activating exterior rear view
mirror parking position” (
컄 page 384).
1 Memory button M
2 Adjustment button
3 Selector switch for right or left exterior
mirror
왘 Stop the vehicle.
왘 Make sure the ignition is switched on
(
컄 page 365).
왘 Press switch 3 until the exterior mir-
ror on the front passenger side is se-
lected.
왘 Adjust the passenger-side exterior rear
view mirror with button 2 so that you
see the rear wheel and the road curb.
왘 Press memory button M.
왘 Within 3 seconds, press one of adjust-
ment buttons 2.
The parking position is stored if the
mirror does not move.
i
If the mirror does move, repeat the above
steps. After the setting is stored, you can move
the mirror again.
To Next Page
Loading...
Need help?
General
