120
Controls in detail
Seats
Multicontour seat*
The multicontour seat has a movable seat
cushion and inflatable air cushions built
into the backrest to provide additional lum-
bar and side support.
The seat cushion movement, backrest
cushion height and curvature can be con-
tinuously varied with switches right side of
the seat on the driver side, or the left side
of the seat on the passenger side.
1 Seat cushion depth
2 Backrest bottom
3 Backrest center
4 Backrest side bolsters
왘 Switch on the ignition (컄 page 38).
Seat cushion depth
왘 Adjust the seat cushion depth to the
length of your upper leg using
switch 1.
Backrest contour
왘 Adjust the contour of the backrest to
the desired position using æ or
ç.
왘 Move the backrest support cushion to
the bottom by using button 2 or to the
center by using button 3.
Backrest side bolsters
왘 Adjust the side bolsters so that they
provide good lateral support using
switch 4.
i
If, after a period of time, the seat no longer
provides the desired contour, then repeat the ad-
justment procedure.
To Next Page
Loading...
Need help?
General
