152
Controls in detail
Control system
The vehicle status message memory menu
only appears if there are any messages
stored.
왘 Press button è or ÿ repeatedly
until the vehicle status message mem-
ory appears in the multifunction dis-
play.
Vehicle status messages have been
recorded
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:
왘 Press button k or j.
The stored messages will now be dis-
played in the order in which they have
occurred. For malfunction and warning
messages, see “Vehicle status messag-
es in the multifunction display”
(
컄 page 358).
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch.
Settings menu
In the
Settings
menu there are two func-
tions:
앫 The function
To reset, press reset
button for 3 seconds.
, with which
you can reset all the settings to the
original factory settings.
앫 A collection of submenus with which
you can make individual settings for
your vehicle.
Warning! G
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner’s
and/or driver’s responsibility to maintain
the vehicle’s operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages (
컄 page 358).
i
The vehicle status message memory will be
cleared when you turn the SmartKey in the start-
er switch to position 1 or 2. You will then only
see high priority messages in the multifunction
display (
컄 page 358).
To Next Page
Loading...
Need help?
General
