153
Controls in detail
Control system
왘 Press button è or ÿ repeatedly
until the
Settings
menu is seen in the
multifunction display.
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
왘 Press the reset button (컄 page 136) for
approximately 3 seconds.
In the multifunction display you will see
the request to press the reset button
again to confirm.
왘 Press the reset button again.
The functions of all the submenus will
reset to factory settings.
Submenus in the Settings menu
왘 Press button j.
In the multifunction display the collec-
tion of the submenus appears.
왘 Press button ç.
The selection marker moves to the next
submenu.
The submenus are arranged by hierarchy.
Scroll down with the ç button, scroll up
with the æ button.
With the selection marker on the desired
submenu, use the j button to access
the individual functions within that sub-
menu. Once within the submenu, you can
use the button j to move to the next
function or the button k to move to the
previous function within that submenu.
The settings themselves are made with
button æ or ç.
i
The settings you have changed will not be re-
set unless you confirm the action by pressing the
reset button a second time. After approximately
5 seconds, the
Settings
menu reappears in
the multifunction display.
For safety reasons, the
Headlamp Mode
func-
tion in the
Lighting
submenu is not reset
while driving.
To Next Page
Loading...
Need help?
General
