408
Practical hints
Replacing bulbs
Low beam bulb (halogen headlamps
only)
왘 Turn housing cover 1 counterclock-
wise and remove it.
왘 Turn bulb holder 6 with the bulb coun-
terclockwise and remove it.
왘 Pull the bulb at its socket out of bulb
holder 6.
왘 Insert the new bulb so that its socket
locates in the recess of bulb holder 6
and is level to it.
왘 Reinsert bulb holder 6 with the bulb in
the lamp and turn clockwise.
왘 Align housing cover 1 and turn it
clockwise.
High beam bulb/high beam flasher
bulb (halogen headlamps)/high beam
flasher bulb (Bi-Xenon* headlamps)
왘 Turn housing cover 2 counterclock-
wise and remove it.
왘 Turn bulb holder 4 with the bulb coun-
terclockwise and remove it.
왘 Pull the bulb at its socket out of bulb
holder 4.
왘 Insert the new bulb so that its socket
locates in the recess of bulb holder 4
and is level to it.
왘 Reinsert bulb holder 4 with the bulb in
the lamp and turn clockwise.
왘 Align housing cover 2 and turn it
clockwise.
Front turn signal lamp bulb
왘 Turn bulb socket 3 with the bulb
counterclockwise and remove it.
왘 Press gently onto the bulb and turn
counterclockwise out of bulb
socket 3.
왘 Press the new bulb gently into bulb
socket 3 and turn clockwise until it
engages.
왘 Place bulb socket 3 back into the
lamp and turn it clockwise.
To Next Page
Loading...
Need help?
General
