Service menu
In the Serv. menu you can:
R
call up display messages
(Y page 213)
R
restart the tire pressure loss warning
system (Canada only) (Y page 317)
R
check the tire pressure electronically
(Y page 319)
R
call up the service due date (Y page 282)
Settings menu
Introduction
The Sett. menu can be used for:
R
changing the instrument cluster settings
R
changing the light settings
R
changing the vehicle settings
R
changing the convenience settings
R
restoring the factory settings
Instrument cluster
Selecting the unit of measurement for
distance
The Display Unit Speed-/Odometer:
function allows you to choose whether
certain
displays appear in kilometers or miles.
The selected unit of measurement for
distance applies to:
R
the digital speedometer in the Trip menu
R
the odometer and the trip odometer
R
the trip computer
R
the current consumption and the range
R
the
navigation instruction in the Navi menu
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
X
Press the = or ; button on the
steering wheel to select the Settings
menu.
X
Press the :
or 9 button to select the
Instr. cluster submenu.
X
Press the a button to confirm.
X
Press the :
or 9 button to select the
Display Unit Speed-/Odometer
function.
You will see the selected setting: km or
miles.
X
Press the a button to save the setting.
Selecting the permanent display function
The Permanent Display: function allows
you to choose whether the multifunction
display always shows the outside
temperature or the speed in km/h (USA) or
mph (Canada).
X
Press the = or ; button on the
steering wheel to select the Settings
menu.
X
Press the :
or 9 button to select the
Instr. cluster submenu.
X
Press the a button to confirm.
X
Press the :
or 9 button to select the
Permanent display function.
You will see the selected setting Outside
Temperature or Speedometer [km/h]:.
X
Press the a button to save the setting.
206
Menus and submenus
On-board computer and displays
To Next Page
Loading...
Need help?
General
