Useful information
These
Operating Instructions describe all the
models and standard and optional equipment
of your vehicle that were available at the time
of going to print. Country-specific differences
are possible. Bear in mind that your vehicle
may not be equipped with all the functions
described. This also applies to safety-relevant
systems and functions.
Read the information on qualified specialist
workshops (Y page 30).
Overview and functions
Important safety notes
G
WARNING
Operating the integrated information systems
and
communications equipment in the vehicle
while driving will distract you from traffic con-
ditions. You could then lose control of the
vehicle. There is a risk of an accident.
Only operate these devices if road traffic con-
ditions permit. If you are unsure about the
surrounding conditions, pull over to a safe
location and make entries only while the vehi-
cle is stationary.
When using FleetBoard
®
, observe the legal
requirements of the country in which you are
currently driving.
FleetBoard
®
TiiRec
FleetBoard
®
TiiRec overview
:
FleetBoard
®
TiiRec
;
Card slot (tachograph driver card or Fleet-
Board
®
)
=
Ñ Home-Call button
?
Ò Event-Call button
A
Ó Service-Call button
B
U Reads out driver card and sends
data
C
LED indicator lamp
FleetBoard
®
is an innovative Internet-based
telematics service designed to provide con-
stant communication between vehicle and
headquarters at any time and location.
Some requirements must be met before
FleetBoard
®
can be operated, e.g. a service
contract. For more information, please con-
tact
FleetBoard
®
Support; see contact details
in the imprint. You can obtain information on
FleetBoard
®
from any Mercedes-Benz Ser-
vice Centre.
FleetBoard
®
vehicle management enables
unlimited access to consumption figures and
information about vehicle parts that are sub-
ject to wear.
204
Overview and functions
FleetBoard
®
To Next Page
Loading...
Need help?
General
