Mercedes-Benz Actros User Manual

FleetBoard
®
functions
FleetBoard
®
TiiRec allows you to carry out the
following functions:
R
Analyse and calculate the driving style
R
Record journey and rest periods
R
Determine the position of the vehicle
R
Remote readout of the driver card and the
mass storage device of the digital tacho-
graph
R
Send predefined messages from the vehi-
cle (Home-Call, Service-Call, Event-Call)
R
Send vehicle maintenance due dates to the
maintenance schedule, e.g. remaining dis-
tance for engine and transmission oil
R
Send vehicle fault memory for fast diagno-
sis and breakdown assistance (only if the
disclosure of data has been agreed to in the
service contract)
R
Send data for the purpose of operational
analysis of the vehicle, e.g. current use and
operating conditions
R
Analyse and evaluate vehicle data via the
Internet
FleetBoard
®
driver card
FleetBoard
®
driver card
The
FleetBoard
®
driver card is used to identify
the driver for driver-related evaluation.
Avoid touching the contact surface points of
memory
chip : with your fingers. Otherwise,
errors could occur when reading memory
chip :.
X
Switch the ignition lock to the drive posi-
tion.
Before beginning the journey/trip:
X
To insert: insert FleetBoard
®
driver
card ; into the card slot of FleetBoard
®
TiiRec until it engages.
The
lettering and memory chip : on Fleet-
Board driver card ; must be facing
upwards. If FleetBoard
®
driver card ; is
inserted incorrectly, a warning tone
sounds.
After the end of the journey/trip:
X
To remove: remove FleetBoard
®
driver
card ; from the card slot.
Sending a message
With FleetBoard
®
TiiRec, you can send 3 dif-
ferent messages to the headquarters which
have been predefined by the headquarters.
X
Switch the ignition lock to the drive posi-
tion.
i
If
the green LED on FleetBoard
®
TiiRec is
continuously lit, FleetBoard
®
TiiRec is
ready for operation.
X
To send a Home or Event-Call message:
press the Ñ or Ò button on Fleet-
Board
®
TiiRec.
A
short warning tone sounds over the loud-
speaker. FleetBoard
®
TiiRec generates the
data which is to be sent. This may take a
few seconds.
X
To send a Service Call message/to acti-
vate
roadside assistance: press the Ó
button on FleetBoard
®
TiiRec for approx-
imately 2 seconds.
A short warning tone sounds over the loud-
speaker and the yellow LED indicator lamp
flashes. FleetBoard
®
TiiRec generates the
Overview and functions
205
FleetBoard
®
Z

Mercedes-Benz Actros Specifications

General

Brand	Mercedes-Benz
Model	Actros
Category	Trucks
Language	English