Problems when tilting the cab
Mechanical-hydraulic cab tilting unit
Problem
Possible causes/consequences and M Solutions
The cab cannot be til-
ted.
The valve lever of the mechanical-hydraulic cab tilting pump is in
the "Tilt back in driving position".
X
Turn the valve lever of the mechanical-hydraulic cab tilting pump
so that it points towards the "Tilt forward" position
(Y page
369).
The tilting hydraulics are leaking or have failed.
X
Have the tilting hydraulics repaired at a qualified specialist
workshop.
Electrohydraulic cab tilting unit
Problem
Possible causes/consequences and M Solutions
The cab cannot be til-
ted.
The cab tilting system is not switched on.
X
In the cab, press the upper section of the C button.
(Y page
370).
The indicator lamp in the C button lights up.
The fuse for the cab tilting pump has blown.
X
Replace the fuse for the cab tilting pump in module A1 in the
main fuse carrier
(Y page 384).
The tilting hydraulics are leaking or have failed.
X
Have the tilting hydraulics repaired at a qualified specialist
workshop.
Engine
Starting and stopping the engine with
the cab tilted
G
WARNING
There are moving components in the engine
compartment. Certain components may con-
tinue to move or suddenly move again even
after the ignition has been switched off, e.g.
the radiator fan. There is a risk of injury.
If you have to carry out work in the engine
compartment:
R
switch off the ignition
R
never
touch the dangerous areas surround-
ing moving components, e.g. the rotation
area of the fan
R
remove jewellery and watches
R
keep items of clothing and hair, for exam-
ple, away from moving parts.
372
Engine
Breakdown assistance
To Next Page
Loading...
Need help?
General
