Display messages
Introduction
Information about display messages
Display messages appear on the multifunction
display.
Display messages with graphical symbols are
simplified in the Operator's Manual and may dif‐
fer from the symbols on the multifunction dis‐
play. The multifunction display shows high-prior‐
ity display messages in red. Certain display mes‐
sages are accompanied by a warning tone.
Please act in accordance with the display mes‐
sages and follow the additional notes in the
Operator's Manual.
For some display messages, a symbol will also
be shown:
R
Õ Further information
R
¨ Hide display message
With the left-hand Touch Control, you can select
the respective symbol by swiping to the left or
right. Press the Õ symbol to show further infor‐
mation on the media display. Press the ¨
symbol to hide the display message.
You can hide low-priority display messages by
pressing the G back button or the left-hand
Touch Control. The display messages will then
be stored in the message memory.
Rectify the cause of a display message as
quickly as possible.
High-priority display messages cannot be hid‐
den. The multifunction display shows these dis‐
play messages continuously until the cause of
the display message has been rectified.
Calling up saved display messages
On-board computer:
4
Service
5
1 Message
If there are no display messages, No Messages
will appear on the multifunction display.
#
Scroll through the display messages by swip‐
ing upwards or downwards on the left-hand
Touch Control.
#
To exit the message memory: press the
back button G.
348
Display messages and warning/indicator lamps
To Next Page
Loading...
Need help?
General
