X
Press the a button.
X
Press the : button to select Yes and
press the a button to confirm.
You can reset the values of the following func-
tions:
R
trip meter
R
trip computer "From start"
R
trip computer "From reset"
R
ECO display
i
If you reset the values in the ECO display,
the values in the "From start" trip computer
are also reset. If you reset the values in the
"From start" trip computer, the values in
the ECO display are also reset.
Navigation menu
Displaying navigation instructions
In the Navi menu, the multifunction display
shows navigation instructions. For more
information on navigation, see the separate
operating instructions.
X
Switch on the audio system with Becker
®
MAP PILOT or COMAND Online; see the
separate operating instructions.
X
Press the = or ; button on the steer-
ing wheel to select the Navi menu.
Route guidance not active
:
Direction of travel
;
Current road
Activating route guidance
No change of direction announced
:
Distance to the destination
;
Distance to the next change of direction
=
Current road
?
Symbol indicating "follow the road's
course"
Change of direction announced without a
lane recommendation
:
Road to which the change of direction
leads
;
Distance to change of direction and visual
distance display
=
Change-of-direction symbol
When a change of direction is announced, you
will see change-of-direction symbol = and
distance graphic ;. This shortens towards
the top of the display as you approach the
point of the announced change of direction.
Menus and submenus
273
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
