X
To reduce the tyre pressure: depress
pressure release button E next to pres-
sure gauge F.
X
When the tyre pressure is correct, unscrew
the filler hose from the valve of the sealed
tyre.
X
Screw the valve cap onto the tyre valve of
the sealed tyre.
X
Pull the tyre sealant bottle out of the tyre
inflation compressor.
The filler hose stays on the tyre sealant
bottle.
X
Stow the tyre sealant bottle, the tyre infla-
tion compressor and the warning triangle.
X
Drive to the nearest qualified specialist
workshop and have the tyre changed there.
X
Have the tyre sealant bottle replaced as
soon as possible at a qualified specialist
workshop.
X
Have the tyre sealant bottle replaced every
four years at a qualified specialist work-
shop.
i
In your vehicle, you will find a sticker with
the Mercedes-Benz Service24h telephone
number, e.g. on the B-pillar on the driver's
side.
Battery (vehicle)
Important safety notes
Work on the battery, e.g. removing or fitting,
requires specialist knowledge and the use of
special tools. Therefore, always have work on
the battery carried out at a qualified specialist
workshop.
G
WARNING
Work carried out incorrectly on the battery
may lead to a malfunction, e.g. a short circuit.
This, in turn, may restrict the functions of the
safety-relevant systems, e.g. the lighting sys-
tem, ABS (Anti-lock Braking System) or
ESP
®
(Electronic Stability Program). The oper-
ating safety of your vehicle may then be com-
promised. You could then lose control of the
vehicle, e.g.:
R
when braking
R
when making sudden steering movements
and/or travelling at an inappropriate
speed.
There is a risk of an accident.
In the event of a short circuit or similar situa-
tion, inform a qualified specialist workshop
immediately. Do not drive any further. You
should have all work involving the battery car-
ried out at a qualified specialist workshop.
For further information about ABS and ESP
®
,
see (Y page 72) and (Y page 77).
G
WARNING
Electrostatic build-up can lead to the creation
of sparks, which could ignite the highly explo-
sive gases of a battery. There is a risk of an
explosion.
Before handling the battery, touch the vehicle
body to remove any existing electrostatic
build-up.
The highly flammable gas mixture is created
while the battery is charging and when jump-
starting.
Always make sure that neither you nor the
battery is electrostatically charged. Electro-
static charge is created, for example:
R
by wearing synthetic fibre clothing
R
due to friction between clothing and the
seat
Battery (vehicle)
389
Breakdown assistance
Z
To Next Page
Loading...
Need help?
General
