DYNAMIC SELECT button
Function of the DYNAMIC SELECT button
*
NOTE Mercedes-AMG vehicles
#
Observe the notes in the Supplement.
You could otherwise fail to recognize
dangers.
You can switch between the drive programs with
the DYNAMIC SELECT button (/ page 185).
Depending on the drive program selected, the fol-
lowing vehicle characteristics will change:
R
Drive
R
Vehicles with AIRMATIC: suspension
(/ page 253)
-
Suspension and damping
-
Vehicle level (speed-dependent)
R
Steering
R
ESP
®
R
Sound of the drive system in the vehicle inte-
rior
R
Point of resistance on the haptic accelerator
pedal
%
In drive program ;, an additional pressure
point is activated in the haptic accelerator
pedal.
R
First point of resistance: at approx. 60%
pedal travel (only in ;)
R
Second point of resistance: transition to
kickdown (always available)
Available drive programs
= (Individual)
R
The following vehicle characteristics are indi-
vidually adjustable:
-
Drive
-
Suspension
-
Steering
-
ESP
®
-
Sound of the drive system in the vehicle
interior
C (Sport)
R
Sporty and dynamic driving characteristics
R
Only suitable for good road conditions, a dry
road surface and a clear stretch of road
A (Comfort)
R
Comfortable driving style
R
Recommended for all road conditions
R
Best balance between eciency and perform-
ance for all driving situations
; (Eco)
R
Economical setting of vehicle functions
R
Recommended for all road conditions
R
Additional rst point of resistance in the hap-
tic accelerator pedal indicates an ecient,
economical driving style
The ESP
®
settings in the drive programs ;
and A are designed for stability. Therefore,
choose one of these drive programs especially
when transporting roof loads, in trailer operation
and when the vehicle is fully loaded or fully occu-
pied.
184
Driving and parking
To Next Page
Loading...
Need help?
General
