Work schedule overview
Maintenance work overview
With BlueTec
®
Without BlueTec
®
Maintenance schedule for maintenance service
Engine: oil and filter change
AP18.00-W-0101C
7
Operation with
diesel fuel: carry out an oil and filter change
at least every two years.
• •
AP18.00-W-0101C
7
Operation
with
FAME fuels (bio-diesel): carry out an oil and
filter change at least once a year.
• •
Check and adjust the fluid level
AP20.00-W-2010A
7
Engine cooling system: check corrosion/antifreeze protec-
tion. Adjustment subject to a separate invoice. In the event of fluid loss, find the
cause and remedy it.
• •
Engine
AP13.22-W-1351A
7
Check poly-V-belt for wear and tear and damage.
• •
Additional maintenance work every second maintenance service (Z2)
AP05.30-W-0560A
7
Check V2 valve clearance, adjust (first maintenance service,
third, fifth, seventh, etc.).
• •
AP14.40-W-1481A
7
Replace AdBlue
®
/DEF filter.
•
Additional work every third maintenance service (Z3)
AP47.20-W-0730B
7
Fuel prefilter: cleaning the filter element.
• •
AP47.20-W-0783A
7
Fuel prefilter with water separator: replace fuel filter.
• •
AP47.20-W-0780A
7
Fuel
filter: replace fuel filter element. For operation with FAME
fuels (bio-diesel): replace fuel filter at the same time as renewing the engine oil
and replacing the filter.
• •
Engine brake: check condition and setting. • •
7
Work item number of the Mercedes-Benz workshop information system (WIS).
60
Work schedule overview
Notes on maintenance
To Next Page
Loading...
Need help?
General
