MAINTENANCE
118
Description Nm lb. in. lb. ft.
Bolts 8 71
11.Reconnect the wiring harness connectors to pencil coil
connections.
a
b
c
3658
a - Wiring harness
connector
b - Pencil coil
c - Bolt
12.Reinstall the rear cowl latch and rear cover. Torque to
specifications.
Description Nm lb. in. lb. ft.
Rear cowl latch - back screws (4) 15 53
Rear cowl latch - top screws with hex
nuts (2)
25 89
Rear cover - screws (2) 15 53
13.Reinstall top cowl.
Fuses
The electrical wiring circuits on the outboard are protected from
overload by fuses in the wiring. If a fuse is blown, try to locate and
correct the cause of the overload. If the cause is not found, the fuse
may blow again.
To Next Page
Loading...
Need help?
General
