INSTALLATION
29
Installing Outboard
!
WARNING
Before operation, the outboard must be correctly installed with
the required mounting hardware as shown. Failure to correctly
fasten outboard could result in outboard ejecting off boat transom
causing serious injury, death, or property damage.
We strongly recommend that your dealer install your outboard and
related accessories to ensure proper installation and good
performance. If you install the outboard yourself, follow instructions
in the Outboard Installation Manual which is provided with the
outboard.
The outboard must be secured to the transom with the four
12.7 mm (1/2 in.) diameter mounting bolts and locknuts provided.
Install two bolts through the upper set of holes and two bolts
through the lower set of holes.
ob00658
To Next Page
Loading...
Need help?
General
