EasyManuals Logo
Home>Mercury>Outboard Motor>225

Mercury 225 User Manual

Mercury 225
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
FUEL AND OIL
eng 47
Filling Remote Oil Tank
Remove filler cap and fill with the specified oil. Oil tank capacity
is 11.5 liters (3 gallons). Replace filler cap and tighten securely.
IMPORTANT: Always make sure the oil tank caps are threaded
on tight. An air leak will prevent oil flow to the engine.
2723
Filling Engine Mounted Oil Reservoir Tank
Remove the top cowl. Loosen the fill cap on the engine oil
reservoir tank. Run the engine until all the air has been vented
out of the oil reservoir tank and tank is filled with oil to the point
of overflow. Retighten the fill cap. Stop the engine and replace
the top cowl.
2724
NOTE: Filling this tank is only necessary if the oil level should
ever drop and the low oil warning system is activated.
Filling Fuel Tank
Fill fuel tanks outdoors away from heat, sparks, and open
flames.
Remove portable fuel tanks from boat to refill them.

Table of Contents

Other manuals for Mercury 225

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 225 and is the answer not in the manual?

Mercury 225 Specifications

General IconGeneral
BrandMercury
Model225
CategoryOutboard Motor
LanguageEnglish

Related product manuals