To Next Page

To Previous Page

MAINTENANCE

70 eng

• Flush the propeller and gearcase exhaust outlet with fresh

water.

• Remove the cowl and wipe off any saltwater spray with a

damp cloth.

EVERY 25 HOURS OR EVERY 30 DAYS OF SALTWATER

OR POLLUTED WATER USE

• Spray the powerhead and all external, unpainted metal

surfaces (except anodes) with Corrosion Guard.

Tube

Ref No.

Description Where Used Part No.

120

Corrosion

Guard

Powerhead and all external,

unpainted metal surfaces

(except anodes)

92-802878 55

EVERY 25 HOURS OR EVERY 30 DAYS, WHICHEVER

OCCURS FIRST

• Visually inspect the front and side cowl latches for tightness.

Tighten if necessary.

• Visually inspect the fuel and oil systems for deterioration or

leaks.

• Visually check steering link rod fasteners for wear. Lubricate

all components (refer to the Installation Manual for

lubrication specifications). Check all attachment hardware

for proper torque tightness.

• Check level and condition of gearcase lubricant.

• Check alternator belt tension.

EVERY 50 HOURS OR ONCE A YEAR, WHICHEVER

OCCURS FIRST

• Lubricate all lubrication points.

• Lubricate splines on the driveshaft.

• Lubricate entire length of driveshaft with Anti‑Corrosion

Grease.

Mercury 225 User Manual

Other manuals for Mercury 225