Trailering Boat/Outboard
The boat should be trailered with the outboard tilted down in a vertical
operating position.
IMPORTANT: The tilt lock and shallow water drive feature (tiller handle models)
on the outboard are not intended to support the outboard in the tilted position
when trailering.
If additional ground clearance is required, the outboard should be tilted up
using an accessory outboard support device. Refer to your local dealer for
recommendations. Additional clearance may be required for railroad crossings,
driveways, and trailer bouncing.
Shift the outboard to forward gear. This prevents the propeller from spinning
freely.
Removing the Motor
1. Stop the engine.
2. Disconnect the fuel connector from the motor.
To Next Page
Loading...
Need help?
General
