SHALLOW WATER RUNNING POSITION
Turn the reverse lock lever to release side and tilt up the engine to set the
engine to shallow water running position.
a - Reverse lock lever
TILT DOWN FROM SHALLOW WATER RUNNING POSITION
Turn the reverse lock lever to lock side, lift up the engine slightly, and put it
down. Reverse lock is done automatically.
a - Reverse lock lever
IMPORTANT: While in shallow water drive position, do not operate the
outboard in reverse. Operate the outboard at slow speed and keep the cooling
water intake submerged.
Trim Adjustment
Trim of the motor can be adjusted to suit the transom angle and loading
conditions of your boat. Be sure to maintain the anti‑ventilation plate parallel to
the water level during cruising.
•
Correct trim: Maintain the trim position pin perpendicular to the water
level to keep your boat level during cruising.
•
Trim down: If the bow rises too high, causing unstable cruising, trim the
trim position pin down.
To Next Page
Loading...
Need help?
General
