GEARCASE LUBRICANT CAPACITY
Gearcase lubricant capacity is approximately 280 cc (9.5 fl oz).
GEARCASE LUBRICANT RECOMMENDATION
Mercury or Quicksilver Premium or High Performance Gear Lubricant.
Submerged Outboard
A submerged outboard will require service within a few hours by an authorized
dealer once the outboard is recovered from the water. This immediate attention
by a servicing dealer is necessary once the engine is exposed to the
atmosphere to minimize internal corrosion damage to the engine.
Following are the emergency measures to be taken on the submerged
outboard.
1. Immediately take it out of the water and wash it with fresh water to
remove salt or dirt.
2. Remove the spark plugs and completely drain the water from the engine
by pulling the rewind starter several times.
3. Sufficiently inject genuine engine oil through the spark plug hole and into
the crankcase from the carburetor side. Pull the rewind starter several
times to circulate the oil throughout the motor.
MAINTENANCE
64 eng
To Next Page
Loading...
Need help?
General
