NOTICE
Without sufficient cooling water, the engine, the water pump, and other
components will overheat and suffer damage. Provide a sufficient supply of
water to the water inlets during operation.
4. Tiller handle models: Set the shift lever to neutral position.
NOTE: Be sure that the shift is at Neutral (N) when starting the engine. This
model is provided with start in gear protection.
5. Turn the throttle grip until the bar mark on the grip faces the triangle mark
on the steering handle.
6. Pull out the choke knob fully. No choke operation is necessary on warmed
engine.
To Next Page
Loading...
Need help?
General
