EasyManuals Logo
Home>Mercury>Engine>4.5L

Mercury 4.5L User Manual

Mercury 4.5L
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
Spray all electrical connections with sealant.
Tube Ref No. Description Where Used Part No.
25
Liquid Neoprene All electrical connections 92- 25711 3
Inspect the sacrificial trim tab or anode plate if equipped, at regular intervals and replace it before it is half gone. If a
stainless steel propeller is installed, additional anodes or a MerCathode system will be required.
Inspect the propeller shaft for fishing line, which can cause corrosion on a stainless steel shaft.
Remove the propeller at least every 60 days and lubricate the propeller shaft.
Do not use lubricants containing graphite on or near the aluminum in saltwater.
Do not paint trim tabs or the mounting surface.
Important Information About Flushing Procedures
MerCruiser sterndrive and inboard engines are used in many different vessels for a variety of recreational and commercial
applications. Choosing the correct flushing procedure for your engine will depend on the engine model, and in some cases the
marine hardware and cooling system water supply features provided by the boat manufacturer.
Contact your authorized Mercury MerCruiser dealer for information about the best flushing procedure for your engine and boat
model.
Flushing Attachments
Flushing attachments for side water pickup
a - Flushing device
b - Hose attachment
Flushing Device 91‑44357Q 2
9192
Attaches to the water intakes; provides a fresh water connection when flushing the cooling system or
operating the engine.
Flushing the Power Package (Alpha Models)
Alpha Models with Standard Cooling
!
WARNING
Rotating propellers can cause serious injury or death. Never operate the boat out of the water with a propeller installed.
Before installing or removing a propeller, place the drive unit in neutral and engage the lanyard stop switch to prevent the
engine from starting. Place a block of wood between the propeller blade and the anti‑ventilation plate.
Sterndrive Water Pickups
This sterndrive is equipped with side water pickups. Side pickups require the flushing attachment (44357Q 2).
21515
a
b
Section 4 - Maintenance
90-8M0128973 eng MAY 2017 Page 79

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 4.5L and is the answer not in the manual?

Mercury 4.5L Specifications

General IconGeneral
BrandMercury
Model4.5L
CategoryEngine
LanguageEnglish

Related product manuals