Mercury 4000 MPC GEN 2 User Manual

4000 MPC GEN 2 PISTOL GRIP REMOTE CONTROL INSTALLATION/OPERATION INSTRUCTIONS
Page 18 / 23 90-899782001 APRIL 2008
!
WARNING
Starting the engine with the drive in gear can cause serious injury or death. Never
operate a boat that does not have a neutral‑safety‑protection device.
25591
a
b
a - Remote control module assembly neutral start safety switch leads
b - Wire harness safety switch leads
IMPORTANT: Do not use anchors, clamps, cable ties, or secure any harnesses or other
items within 45.7 cm (18 in.) of the control cables exiting the remote control module
assembly.
a
b
25589
a - Lanyard stop switch
b - Remote control cable clearance space ‑ 45.7 cm (18 in.)
THROTTLE-ONLY BUTTON REMOVAL
1. Place the control handle in the neutral position.
2. Push the throttle‑only button in until it stops.
3. Hold the throttle‑only button in and rotate the remote control handle to the forward
position.
4. Use a flat blade screwdriver to gently pry the throttle‑only button out of the control
handle.

Mercury 4000 MPC GEN 2 Specifications

General

Brand	Mercury
Model	4000 MPC GEN 2
Category	Marine Equipment
Language	English