Inspection and Maintenance
Inspect the power package often and at regular intervals to help maintain its top
operating performance, and correct potential problems before they occur. The
entire power package should be checked carefully, including all accessible
engine parts.
1. Check for loose, damaged or missing parts, hoses and clamps; tighten or
replace as required.
2. Check plug leads and electrical leads for damage.
3. Remove and inspect the propeller. If nicked, bent or cracked, see your
authorized Mercury Marine dealer.
4. Repair nicks and corrosion damage on the power package's exterior
finish.
Attention Required After Submersion
• Before recovery, contact an authorized Mercury Marine dealer.
• After recovery, immediate service by an authorized Mercury Marine dealer
is required to prevent serious damage to power package.
MAINTENANCE
84 eng
To Next Page
Loading...
Need help?
General