MAINTENANCE
Page 1B-6 90-857138R1 MAY 2000
Lubrication Points
Lubricate Points 1 thru 5 with Quicksilver 2-4-C with Teflon Marine Lubricant or Spe-
cial Lubricant 101.
1. Co-Pilot – Lubricate threads.
2. Swivel Bracket – Lubricate fitting.
2
2
1
3. Transom Clamp Screws – Lubricate threads.
3
NOTE: Lubricating points 4 and 5 require disassembly of the product. These points should
be lubricated at least once a year by an authorized dealer.
4. Tiller Handle Rubber Bushing – Lubricate internal diameter.
4
5. Shift Handle Detent – Lubricate detent.
5
To Next Page
Loading...
Need help?
General
