49
og
FEATURES & CONTROLS
gog83
1–2
3
a
c
b
ogm1
Shallow Water Operation – Tiller Handle Models
Tiller handle model outboards are equipped with a shallow water tilt feature that
allows you to tilt the outboard to a higher tilt angle to prevent hitting bottom.
ENGAGING SHALLOW WATER DRIVE
1 Reduce engine speed to idle. Shift the outboard into forward gear position.
2 Push down the shallow water drive lever (a). Tilt outboard up to the shallow
water drive position. Be sure the cooling water intake (c) is submerged.
IMPORTANT: While in shallow water drive position, do not operate the
outboard in reverse. Operate the outboard at slow speed and keep the cooling
water intake submerged.
3 To release down to run position, lift up the shallow water drive lever (b). Tilt up
the outboard to disengage the shallow water drive lock and lower it down.
To Next Page
Loading...
Need help?
General
