71
oh
MAINTENANCE
goh127
8
2
3
4/5
6
ohz1
ENGINE FUEL FILTER
Inspect the sight bowl for water accumulation and inspect the filter element for
sediment. Clean filter as follows.
REMOVAL
1 Read Fuel System servicing information and Warning on the previous page.
2 Hold onto the cover to prevent it from turning.
3 Turn off the sight bowl.
4 Pull out the filter element and wash it with cleaning solvent.
INSTALLATION
5 Push the filter element (with open end toward cover) into cover.
6 Place the O-ring seal into the sight bowl and screw the sight bowl hand tight into
the cover.
7 Visually inspect for fuel leakage around the sight bowl by squeezing the primer
bulb until firm, forcing fuel into the sight bowl.
otg1
Exterior Care
8 Your outboard is protected with a durable baked enamel finish. Clean and wax
often using marine cleaners and waxes.
To Next Page
Loading...
Need help?
General
