22
On
On
Standard CMOS Setup Page
This page sets up basic information such as the date, the time, the
IDE devices, and the diskette drives. If you press the F3 key, the
system will automatically detect and configure the hard disks on
the IDE channels.
AMIBIOS SETUP – STANDARD CMOS SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Date (mm/dd/yyyy) : Tue May 25, 2004
Time (hh/mm/ss) : 18:27:41
LBA Blk PIO 32Bit
Type Size Cyln Head WPcom Sec Mode Mode Mode Mode
Pri Master : Auto On
Pri Slave : Auto On
Sec Master : Auto
Sec Slave : Auto
Floppy Drive A : 1.44 MB 3 1/2
Floppy Drive B : Not Installed
Month : Jan – Dec ESC : Exit
Day : 01 – 31 ↑↓ : Select Item
Year : 1980 – 2099 PU/PD/+/- : Modify
(Shift)F2 : Color
F3 : Detect All HDD
Date & Time
Use these items to set the system date and time
Pri Master
Pri Slave
Sec Master
Sec Slave
Use these items to configure devices connected
to the Primary and Secondary IDE channels.
To configure an IDE hard disk drive, choose
Auto. If the Auto setting fails to find a hard
disk drive, set it to User, and then fill in the
hard disk characteristics (Size, Cyls, etc.)
manually. If you have a CD-ROM drive, select
the setting CDROM. If you have an ATAPI
device with removable media (e.g. a ZIP drive
or an LS-120) select Floptical.
Floppy Drive
A
Floppy Drive
B
Use these items to set the size and capacity of
the floppy diskette drive(s) installed in the
system.
To Next Page
Loading...
Need help?
General
