27
PCI / Plug and Play Setup Page
This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Share Memory Size 32MB
Primary Graphics Adapter PCI
Allocate IRQ to PCI VGA Yes
PCI IDE BusMaster Disabled
ESC : Quit ↑↓←→ : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal Values
F7 : Load Best Performance Values
Share Memory
Size
This item lets you allocate a portion of the
main memory for the onboard VGA display
application with 8/16/32/64MB options.
Primary
Graphics
Adapter
This item indicates if the primary graphics
adapter uses the PCI or the AGP bus. The
default PCI setting still lets the onboard
display work and allows the use of a second
display card installed in an AGP slot.
Allocate IRQ to
PCI VGA
If this item is enabled, an IRQ will be
assigned to the PCI VGA graphics system.
You set this value to No to free up an IRQ.
PCI IDE
BusMaster
This item enables or disables the DMA under
DOS mode. We recommend you to leave this
item at the default value.
To Next Page
Loading...
Need help?
General
