Mercury KVM800M Series User Manual

29
Chapter 4: Software & Applications
The Browse CD button is a standard Windows command that you can check the
contents of the disc with the Windows 98 file browsing interface.
The Exit button closes the Auto Setup window. To run the program again,
reinsert the CD-ROM disc in the drive; or click the CD-ROM driver from the
Windows Explorer, and click the Setup icon.
The Application button brings up a software menu. It shows the bundled
software that this mainboard supports.
The ReadMe brings you to the Install Path where you can find out path names
of software driver.
Auto-Installing under Windows 2000/XP
If you are under Windows 2000/XP, please click the Setup button to run the
software auto-installing program while the Auto Setup screen pops out after
inserting the support CD-ROM:
1 The installation program loads and displays the following screen.
Click the Next button.
2 Select the items that you want to setup by clicking on it (the default
options are recommended). Click the Next button to proceed.

Mercury KVM800M Series Specifications

General

Brand	Mercury
Model	KVM800M Series
Category	Motherboard
Language	English