Mercury KVM800M Series User Manual

22
Motherboard User’s Guide
OnBoard Floppy Controller
Use this item to enable or disable the onboard floppy disk drive interface.
Serial Port1 Address
Use this item to enable or disable the onboard COM1/2 serial port, and to
assign a port address.
OnBoard IR Port
Use this item to enable or disable the onboard infrared port, and to assign a
port address.
Parallel Port Address
Use this item to enable or disable the onboard Parallel port, and to assign a
port address.
Parallel Port Mode
Use this item to set the parallel port mode. You can select ECP (Extended
Capabilities Port).
ECP Mode DMA Channel
Use this item to assign a DMA channel to the parallel port.
Parallel Port IRQ
Use this item to assign IRQ to the parallel port.
OnBoard PCI IDE Controller
Use this item to enable or disable both of the onboard Primary and Second-
ary IDE channels.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Features Setup
Help Item
Allows BIOS to Enable or
Disable Floppy Controller.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Enabled
3F8/IRQ4
Disabled
378
ECP
DMA3
IRQ7
Both
Enabled
Enabled
Auto
Enabled
Enabled
Disabled
OnBoard Floppy Controller
Serial Port1 Address
OnBoard IR Port
Parallel Port Address
Parrllel Port Mode
ECP Mode DMA Chnnel
Parallel Port IRQ
OnBoard PCI IDE Controller
OnBoard SATA-IDE
Audio Device
Modem Device
Ethernet Device
OnBoard USB Function
USB Function For DOS
Features Setup Page
This page sets up some parameters for peripheral devices connected to the
system.

Mercury KVM800M Series Specifications

General

Brand	Mercury
Model	KVM800M Series
Category	Motherboard
Language	English