!
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE
Indicates a situation which, if not avoided, could result in engine or major
component failure.
Manufacturer’s Capacity Plate
• The manufacturer's plate is located on the inside of the boat transom.
• Never exceed the maximum values as mentioned on the plate.
Example manufacturer's plate; refer to the plate on your boat for product
specific ratings
a - Model number
b - ISO 6185 part (refer to general information following)
c - Maximum load capacity—people + outboard + fuel tank and equipment
d - Maximum outboard power
e - Maximum number of people
f - Maximum air chamber pressure
g - Boat design category—refer to the following table
h - Maximum outboard weight
GENERAL INFORMATION
6 eng
To Next Page
Loading...
Need help?
General