EasyManuals Logo
Home>Mercury>Engine>SKI

Mercury SKI User Manual

Mercury SKI
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
10
CA7
Conditions Affecting
Operation
Weight Distribution
Positioning of weight (passengers and gear) inside the boat has the following effects:
Shifting weight to rear (stern) will:
Generally increases speed and engine RPM.
At extremes can cause boat to porpoise.
Causes bow to bounce in choppy water.
Increases danger of following wave splashing into boat when coming off plane.
Shifting weight to front (bow) will:
Improve ease of planing.
Improve rough water ride.
At extremes, can cause boat to veer back and forth (bow steer).
CA8
Bottom Of Boat
To maintain maximum speed, the following conditions of the boat bottom should be observed.
A. Clean, free of barnacles and marine growth.
B. Free of distortion; nearly flat where it contacts the water.
C. Straight and smooth, fore and aft.
Marine vegetation may accumulate when boat is docked. This growth must be removed before operation; it may
clog water inlets and cause engine to overheat.

Table of Contents

Other manuals for Mercury SKI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury SKI and is the answer not in the manual?

Mercury SKI Specifications

General IconGeneral
BrandMercury
ModelSKI
CategoryEngine
LanguageEnglish

Related product manuals