2. To remove the liftgate lamp bulb
assembly cover mounted on the
liftgate’s interior rear window:
• press in the inner portion of the
two mounting screws on either
side of the cover
• pull out the outer portion of the
mounting screws
3. Detach the socket from the
housing and remove the bulb.
4. Replace the bulb and ease the
socket back into the housing.
5. Replace the bulb assembly cover
and secure the mounting screws.
License plate lamps
To change the license plate lamp
bulbs:
1. Carefully remove screws and
pull the license plate lamp
assembly from the rear bumper.
2. Carefully pull the lamp lens
from the assembly.
3. Remove the bulb to be replaced
and install a new bulb.
4. Replace the lamp lens, the
assembly, and the screws.
Maintenance and care
165
To Next Page
Loading...
Need help?
General
