Ironing
36
Ironing without steam
Remove the water container from the
steam ironing system if you want to
iron without steam.
The steam generator will not heat up
and saves you energy.
Ironing with the non-stick
soleplate
There is a non-stick soleplate in the
(bottom) compartment. Simply clip the
soleplate onto the iron.
With the non-stick soleplate you can
iron appliqués, prints, flocking etc.
There is no need to turn the garment
inside out. This soleplate also reduces
or eliminates the formation of shiny
patches on dark textiles.
Always try it first on an inconspicuous
part of the fabric.
The iron soleplate gets very hot
during use!
Avoid direct contact.
Attaching the non-stick soleplate
Place the tip of the iron inside the
non-stick soleplate.
Pull back the tab, which is located at
the back of the non-stick soleplate.
Hold the tab in this position.
Push the iron completely onto the
non-stick soleplate.
Release the tab again.
The non-stick soleplate is now secured
onto the iron.
Before you start ironing, let the non-
stick soleplate heat up for approx. 1
minute until it has reached the ironing
temperature.
The iron is now ready for use.